上一个
下一个
产品中心 Products Center
搜索
全部分类
1/1
浏览量:
1000
777701 BWT LIQUID PLUS 25 LTR
浏览量:
1000
产品编号
655-777701
数量
-
+
1
产品描述
Product information
This product supersedes product no: 571265
Features
- Minimises scale formulation, corrosion and sludge accumulation
- Simple to Control
- Effective iron dispersant
Benefits
- Maintains sludge in a non-adherent state for removal by blow down
- Simple test to determine level of treatment
- Can be used for boilers of all pressures
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-9 |
|---|
Physical properties
| Density [g/ml] | 1.45 - 1.47 |
|---|---|
| Form | Liquid |
| Freezing Point [°C] | <-20 |
| Materials compatibility | Polypropylene, PVC, Polyethylene, Nylon, Stainless Steel, Viton, Buna –N, Neoprene, Butyl Rubber, Nitrile Rubber, CAF, PTFE |
| pH | 14 |
Technical data
| Not Compatible | Aluminium, Brass, Copper, Zinc, Light Alloys, Natural Rubber |
|---|
Directions for use
Dosing Method
NALFLEET™ BWT Liquid Plus is best applied neat or diluted with condensate or evaporated water to any convenient strength and applied on a continuous basis using a suitable chemical dosing pump.
Sampling and Testing
Control is by simple boiler water tests for alkalinity.
Dosing and Control
The dosage rate of NALFLEET™ BWT Liquid Plus sufficient to produce a P alkalinity in the boiler water of 100ppm is 0.4 liters/1,000 liters of water. NALFLEET™ BWT Liquid Plus is strongly alkaline. Tanks and feeding equipment should be constructed of suitably resistant material such as polypropylene, PVC, polyethylene, mild steel, cast iron or stainless steel. Avoid the use of brass or light alloys.
产品特性
• 最大限度地减少水垢形状 ，腐蚀和污泥堆积
• 易于控制
• 符合FDA规定蒸汽可以接触食物的规定
• 有效的铁分散剂
优势
• 保持污泥处于非粘附状态 ，以便通过吹扫除去
• 简单测试以确定治疗水平
• 可用于所有压力的锅炉
Product Number Product name
777701 BWT LIQUID PLUS 25 LTR
使用说明
加药方法
NALFLEET™ BWT Liquid Plus 最好用纯净水或用冷凝水或蒸发水稀释至任何方便的强度 ，并使用合适的化学计量泵连续施用 。
采样和测试
控制是通过简单的锅炉水测试碱度 。
剂量和控制
NALFLEET™ BWT Liquid Plus的剂量率足以在锅炉水中产生P碱度
100ppm是0.4升/ 1,000升水 。NALFLEET™BWT Liquid Plus具有强碱性 。储罐和喂料设备应采用适当的耐腐蚀材料制成，如聚丙烯 ，PVC，聚乙烯 ，低碳钢 ，铸铁或不锈钢。避免使用黄铜或轻合金。
下一个
无
版权所有 ：江苏z6尊龙官网贸易有限公司 备案号 ：苏ICP备17042192号-1 网站建设 ：